Okay so embarrassingly this took all day long. I built this little jig and added just enough washers to come out precisely to my calculated 25 mm clearance that I will need for my propeller,,, more information on my propeller to come,,,. That is 25mm between the front of the flange to the back of the spinner. Calculated at 31mm , minus 6mm.
![](https://slingtsi.org/wp-content/uploads/2022/09/20220917_181715-1024x577.jpg)
![](https://slingtsi.org/wp-content/uploads/2022/09/20220917_181810-1024x577.jpg)
Leave a Reply