This was the first easy thing that I have done in a while. Everything else has proven to be harder than anticipated.
I installed the foam after cleaning the mating surfaces. I mocked up the location of the latches and marked them. Drilled them. Riveted then from the inside outwards. And everything worked great. They are nice and snug. I then tested fitted them against the engine and they for perfectly.
On to the next thing.
![](https://slingtsi.org/wp-content/uploads/2022/09/20220919_202016-577x1024.jpg)
![](https://slingtsi.org/wp-content/uploads/2022/09/20220919_202021-577x1024.jpg)
![](https://slingtsi.org/wp-content/uploads/2022/09/20220919_202025-577x1024.jpg)
Leave a Reply