So I completed the alternator yesterday… Today I completed the fuel lines. My previous post I did the interior aluminum fuel lines,. And in another post I did the aluminum fuel lines on the outside of the firewall…. But I completed today was the Teflon fuel lines that run to the engine. I figured since the engine would be vibrating it’s probably better to have fuel lines that move also so this is the only part of the system that is not aluminum. I will also be using Teflon fuel lines to connect the wings to the fuselage. I know some other builders are using a block of aluminum for a manifold but I did not need to use that. I just used a tee instead. I did however use the Lockheed part from Patrick shines blog for the jet fuel restrictor between the input and the return lines.